Zibo Qianrun Machinery Manufacturing Co., Ltd.

Belt Conveyor
When using it, you need to select different belt speeds according to the materials to be transported, so that you can achieve the best use effect. So, how should we choose the belt speed when using the belt conveyor in daily life? Next, let’s take a closer look
First of all, for materials with low abrasion and small particles, such as coal, grain, sand, etc., belt conveyors are more suitable to use higher speeds (usually to /) For materials that are highly abrasive, large, and afraid of being broken, such as large pieces of coal, large pieces of ore, coke, etc., the belt conveyor is suitable for low speed (to within). For powdery materials or large amounts of dust that are prone to dust In order to avoid flying dust, low speed (/) is more suitable for materials, while low speed (/) is more suitable for items such as piece goods, easy-to-roll materials or places with higher environmental and sanitary conditions.
Then, for longer distance and horizontal conveyors, a higher belt speed can be selected. The larger the inclination angle or the shorter the conveying distance, the belt conveyor belt speed should be appropriately reduced. If the unloading trolley is used, the actual inclination angle of the conveyor belt entering the unloading trolley is relatively large, so the belt speed should not be too high, which is generally lower than that of the unloading trolley. When using a plow-shaped unloader, the belt speed should not be too high due to additional resistance and wear. Exceeds /, when conveying finely broken materials or small pieces of materials, the allowable belt speed is /, the belt speed of the downward transport belt conveyor with a large inclination angle should not exceed /.
The conveying capacity of the belt conveyor is in a proportional relationship with the belt speed and bandwidth. As the width and thickness of the belt conveyor belt increase, deviation will no longer occur, so a higher value should be selected. of belt. When the belt speed is too high, although the conveying tension is reduced, it will increase the transmission power, increase the wear of the conveyor belt and rollers, and increase the operating noise. This also requires full attention.
The above is about the selection of belt speed during daily use of belt conveyors. The appropriate belt speed must be selected according to specific needs, so as to ensure the normal operation of the belt conveyor.
The article comes from